Waterjet cutting parameters-Shanghai Lionstek Co.,Ltd.

Cutting material	Cutting speed (mm/min)
Cutting material	5mm	10mm	15mm	20mm	30mm	50mm	100mm
Titanium metal	1481	668	419	301	189	105	37
Medium carbon steel	1112	501	314	226	142	79	27
Stainless steel	1129	509	319	229	144	80	28
copper	2194	989	620	446	280	155	54
aluminum	3000	1352	848	609	382	212	74
Marble	8954	4035	2531	1818	1141	634	221
Glass	4897	2270	1384	994	624	347	121

Cutting parameters

Pressure：380MPa

Orifice : 0.33mm（13#）

Abrasive nozzle：0.899mm

Abrasive：80 meshes

Power：37kw（50hp）

Water usage：3.7Lmin

Abrasive flow rate：0.54kg/min

Remarks:

1. Cutting speed mm/min.

2. The table shows the separation cutting speed. If higher cutting quality is needed, the cutting speed should be reduced accordingly.

3. The working pressure of this table is 380 MPa. If the working pressure is increased to 410 MPa, the speed will be increased by 15%. Under the maximum pressure condition, the service life of high-pressure matching will be significantly reduced.

4. If a faster cutting speed is required, a higher power and higher pressure high-pressure pump should be selected. Details will be provided by the sales personnel.