Smart waterjet machines of C series

Configuration: Medium level configuration with a low price for low-cost cutting. The high pressure pipeline adopts the whip style. It also adopts cable drag chain for electrical cables and abrasive hose, making it more economical to use and maintain.It offers a higher cutting quality than the same grade products on the market. The control system adopts USMART® software, making cutting faster and operation simpler.

Cutting Precision:±0.2 mm.

Industrial applications: Metal and nonmetal cutting for aerospace, defense, transportation industries and for the private enterprises.

Model and parameters of smart waterjet machines of C series (three-axis)

Structure	Cantilever or gantry
X， Y and Z axis cutting range (m)	from 0.5X0.5 to 3X8
Z axis travel range(m)	0.15 standard or make to order
Positioning accuracy (mm/m) (measured with laser interferometer)	±0.015
Positioning repeatability accuracy (mm) (measured withlaser interferometer)	0.1
X-Y axis motion accuracy (mm) (measured withballbar)	±0.15
Maximum motion speed (m/min)	6
Software	Lionstek USMART® software
Computer	Lenovo Laptop computer

Specifications of smart waterjet machines of C series (three-axis)

1.1 Overview of the machine

Struction: Cantilever or gantry;

Maximummanual tilting angle: ±45°;

Maximum speed (m/min):6.0;

Software: Lionstek USMART® software;

Computer: Lenovo Laptop computer;

It provides a rapid regulation system of water level to facilitate submerged cutting for significant reduction of dust and noise.

X-axis, Y-axis and Z-axis are fully enclosed with bellowsto protect ballscrews and guide rails for prolonging service life.

1.2 High Pressure Pump

Model: H2O Jet -50 HP
Rated power: 37KW
Maximum continuous pressure: 414MPa
Maximum flow: 3.8L / min
Maximum noise level: 72dB
Ambient temperature requirement: 5 ～ 40 ° C
Volume of Hydraulic oil tank: 11L
PLC control;
On/off switch and emergency stop.
Electrical directional control of hydraulic circuit.
Manual cooling water valve;
Remote control of on/off switch, emergency stop, high-low pressure conversion; Low-pressure water pump with 10 μm filter and pressure gauge;
Oil return filter;
Dual pressure compensation.

1.3 USMART® intelligent control software (copyrighted)

Product Name: USMART® intelligent control software (copyrighted)

The self-proprietary USMART® intelligent software integrates CAD, CAM, and CNC modules into a single user interface. The interface is simple, based on the worldwide standard AutoCAD® (Autodesk® trademark) software platform, which allows users to master complex and precise operations in the shortest time.Learning is made easier.

1.4 Pressurized abrasive tank

Product Name: Pressurized abrasive tank

Model: SSCE1340

Working pressure of air: 0.2 MPa

The automatic abrasive feeding system uses 0.2MPpa compressured air to intermittently push transfer the abrasive in the pressurized abrasive tank to the annular donut-styled abrasive tank hopper on the workbench cutting table through the a hose. The abrasive flow is automatically distributed according coresponding to the cutting needs. The air consumption is small, t.The abrasvie flow velocity is slow, t.The wear is very smallminimal, and t.The failure rateoperation is almost zerotrouble-free.

1.5 Water cooler

Product Name: Water cooler

Model: CA-05;

Standard cooling capacity: 13.05 KW;

The water cooler is set to start and close stop at the same time as the booster pump, which can effectively control the oil temperature and protect extend the seal life of the booster intensifier pump equipment. It greatly reduces the waste of cooling water and has a small footprint.

1.6 Control System

Product Name: Control system;

Ergonomic design

UPS power-off protection

Movable design

Simple and fast operationThe embedded display can has a better protection the device and is easy to clean.

1.7 Three-axis cutting head

Product name: Three-axis cutting head;

Model Overview: The hardware is manually set to a unidirectional tilting angle;

Maximum vertical swingtilting angle: ± 45 °;

Model structure: The rotation pin axis is parallel to the Y axis.

1.8 Triaxial tilting head

Product name: Triaxial tilting head;

Model Overview: The hardware is manually set to a unidirectional tilting angle;

Maximum tilting angle: ± 45 °;

Model structure: The rotation axis is parallel to the Y axis.

Smart waterjet machines of C series-Shanghai Lionstek Co.,Ltd.

Smart waterjet machines of C series